UPVC Door And Window Making Machine–CNC Corner Cleaning Machine

UPVC Door And Window CNC Corner Cleaning Machine

photobank (3)

1. This machine has different models, 3 knives/4 knives/5 knives/6 knives.
2. This machine uses the CNC system to record and select the milling path to perfectly clean the corners.
3. The CNC system can store more than 100 programs for different profile processing.
4. It can complete a thorough cleaning of a corner within 25 seconds.

Technical Parameter
  • Input voltage
380V/50Hz
  • Input power
1.5Kw
  • Air pressure
0.4~0.7Mpa
  • Air consumption
80L/min
  • Milling cutter rotate speed
2800r/min
  • Profile height
20~150mm
  • Profile width
20~100mm
  • Drawing groove width
3mm
  • Drawing groove depth
0.3mm
  • Overall dimension
1850*920*1880mm

CNC Corner Cleaning Machine With 3 Knives

It can clean top/bottom surfaces and outside corners.

 

3

 

 

Note: 1 and 2 are broaches for cleaning the top and bottom
          3 is a milling cutter for cleaning the outer corners.

 

CNC Corner Cleaning Machine With 4 Knives

It cleans top/bottom surfaces and inner and outer corners.

 

4

 

 

Note:1 is the upper cutter for cleaning the top surface and inner corners.
        2 is a downside broach for cleaning the bottom surface.
        3 is a milling cutter for cleaning outside corners.

 

CNC Corner Cleaning Machine With 5 Knives

 

5

 

 

Note: 1&2 are broaches for cleaning the top and bottom.
          3 is a milling cutter for cleaning the outer corners.
          4&5 are drill bits, which are specially used for sliding window sashes and casement window sashes, milling grooves when installing gaskets.

 

CNC Corner Cleaning Machine With 6 Knives

 

6

 

 

 

Note: 1 is the upper cutter for cleaning the top surface and inner corners.

         2 is a downside broach for cleaning the bottom surface.

         3 is a milling cutter for cleaning the outer corners.
         4&5 are drill bits, which are specially used for sliding window sashes and casement window sashes, milling grooves when installing gaskets.


Post time: Feb-21-2022