Auto Double Head Mitre Saw for Aluminum and Pvc Profile
➢ Used for cutting uPVC & aluminium profile at inside 45 degree and 90 degree.
➢ Horizontal clamping device, ensure to fixed the profile well.
➢ With protecting cover to protect motor and worker safety.
➢ Carbide saw blade give accurate processing and high endurance.
➢ Saw blade feeding system adopts imported linear guide pair.
➢ Two heads can work separately or wort at the same time.
➢ Right head adopts motor driving.
➢ Two head can be adjust angle (-45 degree and 90 degree ) by manually.
➢ Horizontal pneumatic clamping device.
➢ Adjusting cutting speed.
➢ Linear round rail for movable head.
| Power supply |
380v 50-60Hz, three phase |
| Input power |
0.55kw+2*1.5W |
| Motor rotate speed |
2800r/min |
| Air pressure |
0.5~0.8Mpa |
| Air consumption |
15L/min |
| Saw blade inside diameter |
Φ450mm |
| Saw blade outside diameter |
Φ30mm |
| Saw blade thickness |
3mm |
| Number of teeth |
120 |
| Cutting angle |
Inside 45 degree , 90 degree |
| Cutting length |
480~3700mm |
| Cutting width |
120mm |
| Overall dimension |
4500*1170*1400(L*W*H)mm |
| Saw blade |
2pcs |
| Working piece support |
1set |
| Air gun |
1pcs |
| Complete tooling |
1set |
| Certificate |
1pcs |
| Operation manual |
1pcs |
| Auto protecting cover Digital display system Cooling system for aluminium profile cutting |
Equipped horizontal clamping fixture, to fix the profile on the machine bed well.
With air cylinder and oil cylinder, feeding speed more smoothly.
Linear round rail for movable head.
Double head cutting machine, if customer needed one piece
All the machine packed with standard export wooden case to make sure customer will received the machines they ordered intact.
All the machines & accessories can be shipped worldwide by sea, by air or by international courier via DHL, FEDEX, UPS.
Packing Detail:
➢ Inner package: stretch film
➢ Outside package: standard export wooden cases
Delivery Detail:
➢ Usually we will arrange dispatch within 3-5 working day after receive payment.
➢ If there are big order or customized machines, it will take 10-15 working day.
We will according to customer's requirements (budget,plant area etc ), to provide the best solution for customers.
All project report and factory layout arrangement are available for valuable customer.
Machine maintenance is necessary ,it will helpful for your machine life, please clean all dusty after use the machine.
7.1 Adjust and change the belt
After using the belt for a long time, should adjust the belt in the drive system through adjusting screw, increase the tension.
If the belt has much abrasion, pls change it.
7.2 Change the saw blade
After using the saw blade for a long time, it is necessary that taking off and attrition the edge to keep the sharp of saw blade. If there is shatter, pls change it.
Taking off the saw blade, use the special spanner in the accessory box, the operation method as below:
